Jump to content

slwiser

Senior Member
  • Content Count

    70
  • Joined

  • Last visited

Posts posted by slwiser


  1. I have both the ESW9 and the UE9. There is a lot of difference between these two. The UE9 is a reference headphone while the ESW9 is a fun and travel along type of can. I would not want to take my UE9 out in the cold. Where you live the cold may not be an issue.

     

    But have a really really big .... :grin: on your face when you listen to them..to me they are hypnotic, they keep me up at night when I should have already gone to bed.


  2. The T2 is much better than the T1 in sound quality, at least to me. With these though there has been an unreasonably high incidence of mis-balanced volume controls; i.e., one side having slightly more volume than the other. At least that was with the first runs of both that I had. The T2 did not suffer from this as I could tell but apparently the T1 did. When I sold it, the buyer came back to me with this issue and I had to take it back. I ended up giving it to the guy who purchased my T2 when I sold it.


  3. IIRC...

     

    The Yammy is very smooth you can call it creamy. It's like sinking into a very plush and warm huge pillow. The RPX-33, comparatively is cold but with better resolution and punch. Probably a classic SS vs tube example. The GCHA is warmer than the RPX-33 but not as warm as the Yammy. The RPX-33 also seemed brighter than the GCHA.

     

    I guess that is why the Yammy is so good with my UE9s. The UE9s are in my estimation very detailed; therefore good synergy. Thanks for you impressions. But yet, when I compared the Yammy with my solid state AT-HA5000 it was the detail of the Yammy that impressed me.


  4. Thanks for your impressions. I especially appreciate your comparison of the Yamamoto with the other amps in your line-up. I also have the UE9 and you are correct that personal preferences play a large part in how one appreciates these headphones.


  5. Thanks. Now the problem is if I do re-terminate, I cannot use my SR325s with my portable setup anymore! Another thing, if by re-terminating, would the Grados benefit from any other types of cables? And if so, what types and who can do the re-cabling?

     

    Be careful about a simple re-termination. For the Audio-Technica headphones this will not work. You will need to go all the way into the ear cups with new cable. The ground wire is shared along the cable length with these headphones.

     

     


  6. Was just reading the specs on the page linked to by Nu_Omega and noticed how weak the speaker amp function of it is: 240mW into 8 ohms. What speakers could you run with it? It would be too weak even for ultra-efficient Avantgarde horns unless you listen to them in near-field setting! Certainly wouldn't be able to drive K1000s properly. Interesting headphone amp nonetheless.

     

    Note the term BGM on the site's information about the HA-02. This means background music. He intends that it would only be played by very sensitive speakers and at very low volumes if used for speakers.

     


  7. I just found a reference to the EXH-313 as using some new audio technology called UST or Ultra Sound Technology. I can't find anything that I can read and understand about this UST. Has anyone heard this headphone and can compare it with one like the Ultrasone Edition 9?

     

    I found the reference on the site called He and Bi headphones. This site rated the EXH-313 with the Edition 9 and the Stax 707s, interesting.

     

    Thanks


  8. IPB Image

     

    It came out as a 2 input and 3 outputs due to room constraints on the back. I wanted to keep adequate room between the RCA connectors for the larger ones that some people use. You can see it setting on top of the Lavry DA10 which itself is setting on top of the AT-HA5000. I am now able to A/B quickly my amps.


  9. I received my Line Router today, the Mapletree LR-1. Well mine does not work out of the box. My Input knob is not fixed so it rotates 360 degrees. I am in contact with Dr. Lloyd to see how he wants to work this out. I hope that in over-rotating my knob that I have not harmed the internal wiring.

     

    Will keep you updated.

     

    Edit: Dr. Lloyd has agreed to a refund less shipping. I am returning it.

     

    Another HeadFi frient just emailed me an alternative that he purchased and says it is quality. I did not know to ask him first.

     

    Art at Amp Box: http://mywebpages.comcast.net/ampbox/page5.html

×
×
  • Create New...