alamakazam
-
Content Count
386 -
Joined
-
Last visited
Posts posted by alamakazam
-
-
recable can easily headover lhs at slt
hahaha woodies i plan to CNC with my friend during holidays for his grado
will let u know if its successful, need to CAD it first tho
so serious?
where do u intend to get CNC?
frankly just paper drawing will do, is not that complex
-
as long they don't sell more than the recommended retail price, it is reasonable
-
they can do 1.. but the digit is minimum 3 digit
-
if u can find woodwork in singapore = expensive
if you are willing to PAY(expensive again) a plastic or alu frame can machined out, their are some workshop (check yellow pages)
else, if u can small nice piece of wood, buy a saw, a engraver, craft the frame yourself... hard way... not as expensive...
-
u probably can find the pin in sim lim tower
PROBLEM - to find the connector housing - is custom made
some use epoxy, some use hot glue to create the housing.... is up to your imagination
)/UPLOADB2B/1063/Big/200909160151465608.jpg)
some cable maker use the above
-
1)the price are mark up too high anyway...
2)don't believe in OEM! it could be fake!
HD598 is a much better choice, there is fake at moment and is good at that price range
-
sound therepist?
guess this is not for pleasure
explain your usage
-
I have a big question for u , before u buy yr headphone..
you want a Turntable, you want to audition them
there is too many variable
Phonostage <---- important
Cartridge <---- important
Tonearm Cable
Interconnects
Power Cable
solve the above variable, or the "common frame of reference" u wanted, will never be accomplished
since is for monitoring... try monitoring headphones ...
Sony MDR-CD900ST Studio Monitor Headphones
-
good effort!
what case is it originally?
anodize how much?
-
the casing is machined drill right? u have a workshop?
singaporean?
uhmm u use lemo connector for input, uniquely yours!
-
no problem
-
-
WTS : Audeze LCD-2 Planar Headphone Rev 1
come with the rosewood box, earpad is the thinner version
Revision 1 , just treat it as a different product, some like Rev 1, some like Rev 2... they are slightly different
Condition : no cracks, no scratches, ear pad still good
Selling : $950 with stock Canare cable or $1000 with 8 core 7N UPOCC (99.99999%) cable
Warranty : Nil
Dealing Location : Tiong Bahru
*I notice lots of response for my cable, I do custom cable making
for a 1.5metre 7N UPOCC copper cable 8 core is $150
for a 1.5metre 7N UPOCC copper cable 4 core is $100
for a 1.5metre 7N UPOCC silver cable 4 core is $200
for a 1.5metre 7N UPOCC silver cable 8 core is $300
price subjected to change due to material cost, but is around that price
-
WTS : No Brand Omega Headphone Stand : extra from oversea purchase
No BRAND, you want brand prepare to pay $250+
Brand New : 10/10 with black cloth dust cover and the paper box
Price : $85 for Wood(1 set left for november order) , $60 for Acrylic (only preorder, bad sales for acrylic)
Dimension : Height 26cm, width 13cm(top widest part),15cm(bottom base)
Quality : I give it 9/10 for acrylic , 8.5/10 for wood(because is natural wood, cannot have perfect grains and may have marks, is random some are just lucky to be in perfect condition) , I have put up good quality pictures, judge yourself
Dealing Location : Tiong Bahru MRT
PM your contact
fit smaller type of headphones like the monster below, lcd-2 cable will have to bend A bit
some samples of what other headphone will fit
actually all is possible, the XL lcd-2 I have is enormous and it does fit
below is not my photo, but u get the idea, is a grado, akg , denon, and a STAX!!
-
a reverse angle shot of pic3
so this is a replaced pot?
-
the middle pin is screwed up right?
take a photo of pic3 on the other side, or trace the middle pin leads to where, then wire to it
-
but they spam 50 post.... that is even more irritating
-
pics
but I guess u want to desolder your POT, but damage one of them...
wire jump bottom PCB should be still ok
-
wires reroute the pcb
-
SOLD SOLD SOLD
-
WTS : 3 Channel Beta 22 with Sigma 22 PSU
Warranty : 6 months alamakazam warranty, parts not included
Selling Price : $730 - selling at cost price (see breakdown below)
No obligation testing during weekend, kim tian road(tiong bahru area)
probably need a decent casing, $300-500 depends on size pattern
if u don't mind the vintage converted casing, looks ok, not solid built, but still passable
GlassJarAudio Price
3 Beta22 board Kit
1 Epsilon Board
1 Sigma22 PSU Board Kit - 30volts
Total ~ SG$630
Misc
Connectors $15, stands $15, step potentiometer $15, rca plug $15, copper wiring $15, etc $25
Total = $730 material cost
*I can also build B22 for you, you provide parts, I assemble one set for a good buffet dinner
, so far I have made 2 sets of Beta22 review
http://www.headfonia.com/the-beta22-amplifier/
My pics, I had to make a frontplate , made out of acrylic behind is aluminum sheet supported.
transformer is shielded with copper sheet
-
http://www.amb.org/audio/sigma11/
replace your wall ac to dc adapters!
this sigma 11 can be configured as
5,9,12,15,24,27,30,36 volts (DC)
objective : save time in gathering parts and share this good psu and for those bad in DIY can pay us some $$ to assemble 1 set
approximate cost per set
DIY ~ $180 - $220
assembles ~ $220 - $280
depending on how much juice u want from it, transformer size price varies
-
5 years ago the price was in the 400 range.... times have changed!
time pass... u just dug a 1 year old thread
well this aego is a good solid performer
-
my intention was actually asking for fellow members here who maybe happen to have spare or extra mini3 board..not asking where to get the board from local shop
if someone has the amb mini3 pcb, not the one from hohodiy, or alvin (the one with slightly wider pcb), please PM me
well too bad, u miss my order... my amb sigma22 stuff just arrive 2days ago
got it
in The Classifieds
Posted · Edited by alamakazam · Report reply
got it