travelfotografer

High performance cable with world's best connectors, over-sized copper wires and silver solder for low electrical resistance. Ensures optimal voltage and current supply from your power supply to your audio component. See https://carousell.com/p/audiophile-dc-cable-159800048/

Adaptor to connect your 2.5mm TRRS balanced headphone/IEM cable to 4pin XLR balanced headphone amplifier output. High performance adaptor with world's best connectors, silver-plated UP-OFC wires and silver solder for low electrical resistance. See https://carousell.com/p/2-5mm-trrs-to-4pin-xlr-adaptor-162079747/

Services Provided: • Re-terminate your headphone cable* to 4pin XLR (male) for use with balanced headphone output. • Add 4pin XLR (female) to make adaptor from balanced cable to original stereo phone plug. *can be removable or non-removable headphone cable See https://carousell.com/p/reterminate-headphone-cable-to-balanced-4pin-xlr-adaptor-162290083/

Service provided: • Modify your AKG headphones to use removable/detachable cables with 3.5mm stereo phone connectors. See https://carousell.com/p/akg-550-551-553-removable-cable-mod-162259619/

Service provided: • Modify your Beyerdynamic headphones to use removable/detachable cables with 4pin Tiny XLR* connectors. *4pin Tiny XLR connectors are used by Audeze headphones. See https://carousell.com/p/beyerdynamic-removable-cable-mod-162084280/

Service provided:• Modify your Fostex/Denon headphones to use removable/detachable cables with SMC* connectors.*SMC connectors were used by HiFiMan headphones.See https://carousell.com/p/fostex-denon-removable-cable-mod-162162320/

Services provided:• Modify your Fostex/Denon headphones to use removable/detachable cables with SMC* connectors.• Re-terminate the stock cable with SMC* connectors to use with the modded headphones.*SMC connectors were used by HiFiMan headphones.See https://carousell.com/p/fostex-denon-removable-cable-mod-stock-cable-retermination-162164048/

This is for modding your Sennheiser HD800 to tame the 6kHz peak. In effect turning your HD800 to be more like a HD800S, but without the bloated/distorted bass of the HD800S. Yours for $25. For more info, read here: https://www.innerfid...response-page-2 http://www.superbest...resonator.1147/ http://www.superbest...est-check.1558/ If you need help to install this mod, I can do so for an additional $5 on the spot. PM if interested.

sold sold sold

[sold sold sold]

[sold sold sold]

Singapore-based service: (1) Install sockets on your headphones to use removable cables. (2) Make new custom removable cables for your headphones. (3) Replace the stock cable on your headphones with new cable. (4) Re-terminate your existing headphone cable with new plugs (e.g. for use on another headphone or for balanced amplifier output) Following are some examples. Prices are indicative and depend on chosen parts and length. Contact me to customize. Clockwise from top-left: Removable cable mods for Beyerdynamic T5p (4-pin miniXLR) [s$150], Beyerdynamic DT 880 PRO (4-pin miniXLR) [s$150], AKG K551 (3.5mm TRS) [s$56] and Denon AH-D7000 (HiFiMAN SMC) [s$87]. All prices exclude cable. Clockwise from top-left: Custom removable cables for Sennheiser HD700 (2.5mm TS) [s$85], AKG K812 (authentic LEMO connector) [s$140] and Audeze LCD-2/LCD-3 (4-pin miniXLR; Neotech UPOCC copper wires, Teflon-insulated, cotton-sleeved and braided) [s$215]. Clockwise from top-left: Replacement cable mods done for Audiotechnica ATH-ESW9 [s$118] and Grado SR125i [s$118], Sennheiser HD414 cable re-terminated for use with Denon AH-D600 [s$53] and Denon AH-D7000 cable re-terminated for use with HiFiMAN [s$56]. Choice of socket/connector for headphone: Options include Sennheiser HD600/650 2-pin connector, 2.5mm TS plug (used by Sennheiser HD700 and Oppo headphones), Sennheiser HD800 2-pin connector, 3-pin miniXLR (used by AKG headphones), 3-pin LEMO connector (used by AKG K812), 4-pin miniXLR (used by Audeze headphones), SMC connector (used by HiFiMAN headphones), etc. Choice of connector for source equipment: Balanced: 2.5mm TRRS, 3.5mm TRRS, dual 3.5mm TRS for Pono, 4-pin Kobiconn connector for RSA Protector, 4-pin miniXLR, 4-pin XLR, dual 3-pin XLRs, etc. Single-ended: 3.5mm or 6.35mm TRS. Choice of cables/wires: Professional audio cables from Canare, Belden, Van Damme, Mogami, Cardas, etc. Neotech UPOCC copper and silver wires. 4.7% Silver Solder used: Made in Japan Oyaide SS-47 Silver Solder contains 4N (99.993%) pure tin. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability. Price: Material cost plus service fee. Material cost is the actual cost of any parts (e.g. sockets, plugs, wires, etc) used. Service fee is based on complexity (e.g. soldering points, cable y-splits, sleeving, headphone cup modification, etc). Contact: Leon permanent.head.damage.sg@gmail.com Thanks for reading, Headphone mods, custom cables and interconnects by PermanentHeadDamage

Updated with new mods and cables done! Thanks for reading, Headphone mods, custom headphone cables and interconnects by PermanentHeadDamage

[deleted]

[deleted]

Singapore-based service: (1) Install sockets on your headphones to use removable cables. (2) Replace the stock cable on your headphones with new cable. (3) Make new custom removable cables for your headphones. (4) Re-terminate your existing headphone cable with new plugs (e.g. for use on another headphone or for balanced amplifier output) Following photos are examples. Contact me to customize. Removable cable mod done for a Beyerdynamic T5p using Neutrik-Rean 4-pin miniXLR sockets for $120 (removable cable not included and for illustration purpose only) Replacement cable mod done for an Audiotechnica ATH-ESW9 using Canare L-4E5C and Neutrik right-angled 3.5 mm TRS plug for $96 Replacement cable mod done for a Grado SR125i using Canare L-4E5C and Neutrik right-angled 3.5 mm TRS plug for $96 Custom cable made for Sennheiser HD700 headphone using Canare L-4E5C, Amphenol professional 6.35mm TRS plug and custom 2.5mm TS plugs for $80 Custom cable made for AKG K812 headphone using Belden 1804a, Amphenol professional 6.35mm TRS plug and authentic LEMO connector for $130 Photos of custom cables hooked up to customer's headphones Sennheiser cable re-terminated with two 3.5mm plugs for use with Denon AH-D600 headphones Choice of socket/connector for headphone: Options include Sennheiser HD600/650 2-pin connector, 2.5mm TS plug (used by Sennheiser HD700 and Oppo headphones), Sennheiser HD800 2-pin connector, 3-pin miniXLR (used by AKG headphones), 3-pin LEMO connector (used by AKG K812), 4-pin miniXLR (used by Audeze headphones), SMC connector (used by HiFiMAN headphones), etc. Choice of connector for source equipment: Balanced: 2.5mm TRRS, 3.5mm TRRS, dual 3.5mm TRS for Pono, 4-pin Kobiconn connector for RSA Protector, 4-pin miniXLR, 4-pin XLR, dual 3-pin XLRs, etc. Single-ended: 3.5mm or 6.35mm TRS. Choice of cables/wires: Professional audio cables from Canare, Belden, Van Damme, Mogami, Cardas, etc. Specialized UPOCC silver and copper wires. Contact me to discuss. 4.7% Silver Solder used: Made in Japan Oyaide SS-47 Silver Solder contains 4N (99.993%) pure tin. Furthermore, 4.7% silver and 1.7% copper are contained for the purpose of improvement of electric conductivity and durability. Price: Material cost plus service fee. Material cost is the actual cost of any parts (e.g. sockets, plugs, wires, etc) used. Service fee is based on complexity (e.g. soldering points, cable y-splits, sleeving, headphone cup modification, etc). Contact: Leon permanent.head.damage.sg@gmail.com Thanks for reading, Headphone mods, custom cables and interconnects by PermanentHeadDamage

For sale is a mint condition custom cable for AKG K240, K271, K701, K702, Q701, K712, K7XX and other AKG headphones. Made by Venus Audio in USA. Length is 3m. Cable is Canare Star Quad L-4E5C. MiniXLR connector is Neutrik-Rean 6.3mm phone connector is Amphenol Yours for $40 Please SMS/WhatsApp eight three nine nine seven four four nine ~Leon

Sennheiser cable for HD 414 for $15 In like new cosmetic condition and fully functional. SMS/Whatsapp Leon at eight three nine nine seven four four nine

Price: $210 / pair Two pairs available.

SOLD

SOLD!

Still available!

Still available!

Brand New in Sealed Box. This is in retail packaging. Tape seal on box is unbroken. Received from Ultimate Ears as promotional item. I kept this as a backup set. Now selling to fund another IEM purchase. What you get looks like this: When opened: Yours for S$110(Cash; FIRM). Buyer gets to open the tape seal and must commit to purchase unless earphones are DOA. Meet up at any North-East Line station, or Circle Line Station between Harbourfront and Serangoon.

Brand New in Sealed Box. This is packaged in the Amazon brown box. Tape seal on brown box is unbroken. The inner black product box is Ultimate Ears' "eco-friendly" packaging. Purchased from Amazon.com. I kept this as a backup set. Now selling to fund another IEM purchase. What you get looks like this when opened: Yours for S$290(Cash; FIRM). Buyer gets to open the tape seal and must commit to purchase unless earphones are DOA.