Rameish 0 Report post Posted March 10, 2003 4 matched sets of Svetlana EL34 (Matched Quad) @ S$120 per quad. 24 pieces of Mullard CV4003 (aka 12AU7) @ S$50 per tube 4 pieces of Mullard CV4003 (used) @ S$35 per tube 8 pieces RCA 12BH7A @ S$30 per tube 8 pieces Philips 12BH7A @ S$40 per tube 12 pieces Ei 12AX7 @ S$20 per tube I do an inventory and list more soon. I have 12AT7. 6DJ8 etc but can't remember the quantity right now - let me do an inventory check again. Share this post Link to post Share on other sites
Barradio 0 Report post Posted March 11, 2003 Hi Rameish I am looking for 3 mica design SYLVANIA 12AT7WA with green lable. If you have stock PM me. Thanks Share this post Link to post Share on other sites
Rameish 0 Report post Posted March 15, 2003 Sorry no Sylvania 12AT7WA. Esp the 3 mica versions. These military tubes were once cheap but now everybody wants them for low microphonic characteristics. I only have a pair of Mullards of 12AT7 spec. I'm really not a tube dealer just was once a tube fanatic - when I liked a particular tube I would just buy in bulk because I know they won't be around the same time next year. Unless you're looking for a particular type of sound stick with tested new stuff. Then when you become an old hand you can try some NOS - but pelase be aware that even old hands get burnt. I once had a Swiss company send me 20 pcs of Mullards (they were labled and boxed as Mullards). When I told them they were Tungsram tubes made in Hungary by looking at the plate structure and relabled they immediately appologised and gave me a full refund (60 days later). Besides it didn't have other Mullard markings. Becareful. Share this post Link to post Share on other sites
N@Z 0 Report post Posted August 17, 2003 Bump. Just trying my luck are the used Mullards CV4003 still available? Any chance of a discount, might want to take 2 pieces. Share this post Link to post Share on other sites
tee 0 Report post Posted August 17, 2003 Hi Rameish, Am keen on your Mullard CV4003..will pick up from you later today. Share this post Link to post Share on other sites
iconic 0 Report post Posted August 17, 2003 i am keen for any tubes that are compatable with the mg head otl (first edition) Share this post Link to post Share on other sites
Rameish 0 Report post Posted August 22, 2003 (edited) Iconic, Could you tell me what tubes are those? 12AX7 ~ 12AU7, 12AU7WA, 5751, CV4003(4), CV491, CV4053, 5814A, 5963, ECC82, ECC802S, ECC83S, 7058, 7729, 7319, 7316, (JG)6189. Edited August 22, 2003 by N@Z Share this post Link to post Share on other sites
iconic 0 Report post Posted August 23, 2003 (edited) EL84 output (power) tubes and 5751 input tube. I'm not sure of the compatiable tubes or their correct type. N@Z probably has a better idea. thanks, peter Sorry didn't want to crap on the thread so I put my comments into your post. The Output tubes (shorter) are as per indicated above & the power tubes (taller) are the EL84 or 6BQ5. I think 7189A, CV2975, 6CH6, EL821 can also be used. Edited August 23, 2003 by N@Z Share this post Link to post Share on other sites
N@Z 0 Report post Posted August 28, 2003 Bump & also wanting to find out whether you have found any other tubes for sale. Share this post Link to post Share on other sites