uberburger101 0 Report post Posted April 4, 2009 Should be someone around the Woodlands area... Share this post Link to post Share on other sites
ical 0 Report post Posted April 4, 2009 Or Causeway Point. Share this post Link to post Share on other sites
Stereo_Electronics 0 Report post Posted April 4, 2009 (edited) Now I am curious of who this "someone" we know is? Actually I was trying to do up a power cord for my setup so I started requesting samples from OEM factories that manufacture UP-OCC powercords for "famous Japanese" companies whom I cannot mention. It was under table and I had to protect my old friend as this snake was meant for the Japanese powercord company only. I didn't want to spent too much on plugs which only looks good but yields minimum improvement so I went on a research into the difference between the best and the normal ones and discovered, I could actually get high conductivity thru some modifications inside and outside the plugs therefore I ended up with normal Wattgates modded plugs which is most bang for bucks after comparing to a Oyaide P046/C046. Of cos they don't look as eye candy as the Oyaide but it was good enough for me. Wanted to pass Kidult the burn-in one but was taken by someone else, so Kidult will be doing the favour of burning in for me. Edited April 4, 2009 by Stereo_Electronics Share this post Link to post Share on other sites
Kachui 0 Report post Posted April 4, 2009 Actually I was trying to do up a power cord for my setup so I started requesting samples from OEM factories that manufacture UP-OCC powercords for "famous Japanese" companies whom I cannot mention. It was under table and I had to protect my old friend as this snake was meant for the Japanese powercord company only. I didn't want to spent too much on plugs which only looks good but yields minimum improvement so I went on a research into the difference between the best and the normal ones and discovered, I could actually get high conductivity thru some modifications inside and outside the plugs therefore I ended up with normal Wattgates modded plugs which is most bang for bucks after comparing to a Oyaide P046/C046. Of cos they don't look as eye candy as the Oyaide but it was good enough for me. Wanted to pass Kidult the burn-in one but was taken by someone else, so Kidult will be doing the favour of burning in for me. That is indeed interesting. Would you be making this for sale in the future? Would sure like to audition it if it is possible. Share this post Link to post Share on other sites
Stereo_Electronics 0 Report post Posted April 4, 2009 Please audition, this is like a blind test, would love to know the end results. Share this post Link to post Share on other sites
Eric Chia 0 Report post Posted April 4, 2009 interesting .... i look to audit it if i got the chance.... maybe can spare me from buying any cables for time being if i like this yellow cables... Share this post Link to post Share on other sites
jojo_b2 0 Report post Posted April 5, 2009 Can I also tryt lets see how it fares with the rest of the inventory. Share this post Link to post Share on other sites
uberburger101 0 Report post Posted April 5, 2009 The stuff Aron makes is normally quite outstanding, so I think this one shouldn't be any different. Just hope it doesn't break the bank. Share this post Link to post Share on other sites
Stereo_Electronics 0 Report post Posted April 5, 2009 (edited) The stuff Aron makes is normally quite outstanding, so I think this one shouldn't be any different. Just hope it doesn't break the bank. With the snake hiding within the yellow sleeves, all I need to to add nice plugs to charge a premium but nah... just sharing poison with you guys. Must look back at this thread for the culprit who reignite my quest for power cords.... Edited April 5, 2009 by Stereo_Electronics Share this post Link to post Share on other sites
jojo_b2 0 Report post Posted April 5, 2009 With the snake hiding within the yellow sleeves, all I need to to add nice plugs to charge a premium but nah... just sharing poison with you guys. Must look back at this thread for the culprit who reignite my quest for power cords.... I Second that. Some connector ends are more expensive than the cables. lol! Aaron you joining the power chord quest provides people and forumers alike another option locally. Hey this might be even better than most in the market. Share this post Link to post Share on other sites
Yon 0 Report post Posted April 6, 2009 All thanks to this thread I have recently purchase an Acrolink 4030 power cord which I'm quite impressed over my previous JPS superconductor 2, the obvious transparency and detail was hard to miss. However one week after my Acrolink purchase, I am yet again stunned by how much difference powercords can make after listening to Aron's new powercord. But I'm still going to test it further, letting the Acrolink burn in more (maybe another 1 week?) before I'm totally convinced. (I'm a little bias over the Acrolink, and they are using high grade Oyaide plugs! ) Share this post Link to post Share on other sites
Kachui 0 Report post Posted April 6, 2009 All thanks to this thread I have recently purchase an Acrolink 4030 power cord which I'm quite impressed over my previous JPS superconductor 2, the obvious transparency and detail was hard to miss. However one week after my Acrolink purchase, I am yet again stunned by how much difference powercords can make after listening to Aron's new powercord. But I'm still going to test it further, letting the Acrolink burn in more (maybe another 1 week?) before I'm totally convinced. (I'm a little bias over the Acrolink, and they are using high grade Oyaide plugs! ) Hmmm...Now you've made me really want to audition Aron's powercord. I am using the Acrolink 4030 with Oyaide 004, as well (on my CDP). So how does the audition of this cord arranged? Thanks. Share this post Link to post Share on other sites
Yon 0 Report post Posted April 6, 2009 Hmmm...Now you've made me really want to audition Aron's powercord. I am using the Acrolink 4030 with Oyaide 004, as well (on my CDP). So how does the audition of this cord arranged? Thanks. I really can't say... I like it on classical music a lot, it seems to give the music emotion (maybe I'm a bit exaggerated). The Acrolink is not bad too but don't know why I seem to pay more attention when the yellow snake is connected on.... like there is something extra? Share this post Link to post Share on other sites
Kachui 0 Report post Posted April 6, 2009 I really can't say... I like it on classical music a lot, it seems to give the music emotion (maybe I'm a bit exaggerated). The Acrolink is not bad too but don't know why I seem to pay more attention when the yellow snake is connected on.... like there is something extra? Are you using the Acrolink on your source? And the cord for your amp? I am using the Acrolink 4030 with the Tunami GPX-R, which I find to be pretty good combination, one is smooth and detailed, the other provides plenty of power and nice bass. Share this post Link to post Share on other sites
Yon 0 Report post Posted April 6, 2009 Are you using the Acrolink on your source? And the cord for your amp? I am using the Acrolink 4030 with the Tunami GPX-R, which I find to be pretty good combination, one is smooth and detailed, the other provides plenty of power and nice bass. I'm using the 4030 on the source and JPS on the amp, the yellow sounds good on both sides and I'm thinking of asking Aron to make another set for me to try, I know he is also planning to make a power distributor that he wants me to try over my Tice audio power conditioner, so maybe try everything all at one go. Share this post Link to post Share on other sites