Jump to content
Sign in to follow this  
littlemart

Topping/ SMSL / Cayin Portable Amplifier DAC, DAP

Recommended Posts

Topping A30 - Desktop Amplifier (New Model)

a30_2.jpg

Overview:

- Two outputs for different impedance of the headphone: 3.5MM and 6.35MM headphone port, can be used for a variety of headphones and earbuds.

- Two kinds of operating voltage mode and three kinds of gain (0dB / 9dB /18dB) selection mode.

- A30 uses the high-performance TI HIFI chip OPA161, OPA2134 (changeable) and TPA6120.

- Maximum output power of A30 can reach up to 1551mW * 2.

- Aluminum body, each part is through high automation, high-precision machining creating (Laser engraving).

- Power by a special customized three-way high-performance linear power supply

Most competing products use 1x15V or etc adapter to the amplifier, this 1x15V will be convert inside the amplifier and cause noise and interference. But we use linear power adapter to provide 2x15V and 1x8V to A30, which help A30 avoid these problem. 2x15V used for high fidelity headphone amplifier circuit. 1x8V used for MCU, LED and relay. Less noise, less interference.

- Using Hi-fi grade NEC relay, WIMA capacitance, Nichicon FW series HIFI electrolytic capacitor, ALPS potentiometer etc

 

Specifications:

Analog input 1 x RCA (L + R)

LineOUT 1 x RCA (L + R)

Headphone output 1 x 6.35 headphone jack; 1 x 3.5 headphone jack

The recommended load impedance range: 16-600Ω

Maximum output power:

1551mW x 2 (PO = Hi, 6.35 headphone port, RL = 32Ω, THD + N = 1%)

291mW x 2 (PO = Hi, 6.35 headphone jack, RL = 300Ω, THD + N = 1%)

152mW x 2 (PO = Hi, 6.35 headphone jack, RL = 600Ω, THD + N = 1%)

757mW x 2 (PO = Hi, 3.5 headphone jack, RL = 32Ω, THD + N = 1%)

258mW x 2 (PO = Hi, 3.5 headphone jack, RL = 300Ω, THD + N = 1%)

143mW x 2 (PO = Hi, 3.5 headphone jack, RL = 600Ω, THD + N = 1%)

 

Selling at $170

Come in Silver

 

 

 

Topping NX5 (new model)

nx5aa.jpg?w=450

AD8610+BUF634 high performance combination

Every sound channel of Topping NX5 use low noise HIFI Operational amplifier AD8610 of American ADI as Signal amplifier.

Every channel use one piece of BUF634 as output buffer of output circuit.

  • Mega bass
  • low Battery LED alert
  • USB intelligent Charging
  • 2400mAh large-capacity battery
  • 30hr playback time
  • Come in Black/Silver Color'

Specification:

Weight:138g

Size:108mm*60mm*13mm

Analogue audio input port: 1*3.5mm

Headphone input port: 1*3.5mm

Full battery woking hours: 30hours

Output Power:

292mW (RL=16Ω,THD+N=1%)

285mW (RL=32Ω,THD+N=1%)

193mW (RL=64Ω,THD+N=1%)

95mW (RL=150Ω,THD+N=1%)

51mW (RL=300Ω,THD+N=1%)

26mW (RL=600Ω,THD+N=1%)

Voltage range:11.1Vpp

SNR:

122dB(RL=300Ω,Gain=L)

116dB(RL=300Ω,Gain=H)

Input sensitivity:

3.85Vrms(Gain=L)

1.40Vrms(Gain=H)

Gain:+0dB(Gain=L);+8.9dB(Gain=H)

Frequency Response: 10Hz-200KHz

Suitable Headphone Impedance: 16-300Ω

Min THD+N:0.0004%(RL=300Ω,Gain=L Pout=40mW)

 

Selling at $180

 

 

Topping NX3 (New Release)

 

nx3a.jpg?w=545&h=360

Topping NX3 Portable Headphone Amplifier

 

Following the very popular NX1 portable amplifier, Topping launch another value for money portable amplifier NX3. Internal amplifying chip using TI TPA6120A2 which is currently use in the very costly SONY’s PHA-3 which price over $1000.

  • TI TPA6120A2 amplifier chip
  • OP Amp – OPA2134
  • Mega bass
  • low Battery LED reminder
  • USB intelligent Charging
  • 2400mAh large-capacity battery
  • 25hr playback time
  • Come in Black/Silver Color

Specification:

a) Output Power: 103mW@ 16ohm load

98mW@ 32ohm load

30mW@ 25ohm load

B) THD+N: <0.0031% (32ohm 5mW)

<0.0032% (32ohm 20mW)

c) Frequency Response: 20Hz-20kHz

d) Suitable Headphone Impedance : 16-300 ohm

f) Noise: <9u V (Gain=L)

g) Dimensions: 66mm X 108mm X13mm

h) Weight: 145g

 

Package:

a) NX3 X1

b ) Audio cable X1

c) USB Charger Cable X1

d) Silicone Band X2

f) Velcro X5

Selling @ $110

 

Topping NX1

 

Topping NX1A (new model)

 

nx1a_e.jpg?w=300&h=225

The Topping NX1A (NX1 upgraded version) has been designed for MP3/MP4/mobile phone/computer that can not get best effect of high impedance from the headset due to the low power.

 

NX1A keep same circuit and component of NX1 to keep a same sound. But after modifying other part to save power, NX1A’s playback time up to 150h, that’s 50% improvement of NX1. It takes less than 3 hour to fully charge the battery. Even 5 minutes charge could provide 10 hour playback.

Its USB charging port has been enhance to be able to use standard Micro Usb cable for charging

  • 100mW*2 output power.
  • Built-in rechargeable lithium battery, approx 150 hours playback time.
  • Selectable gain (H & L)
  • Use high quality components to get better performance. WIMA capacitance, EPCOS capacitance and ALPS potentiometer
  • Small size

Selling at $75

 

 

———————————————————————————————————————–

SMSL SAP-5

 

 

 

sap5_h.jpg

sap5_c.jpg

 

Upgrade version from the previous popular SAP-4

  • Portable Headphone Amplifier with Bass boast
  • Smart and lightweight
  • Using replaceable Nokia battery with run time: 40+ hours

Selling at $75

Currently available in Black

Edited by littlemart

Share this post


Link to post
Share on other sites

CAYIN (Spark)

 

Cayin (Spark) N5 DSD Lossless Music Player (new model)

n5_h.jpg

 

” Fluid navigation. Great built quality. Beautiful exterior. Warm and detailed sound. The Dual Micro SD Card Slot came in handle” – The kind of feedbacks got from many N5 owner.

 

- Carefully tuned Balance amplifier circuit

- 2.5mm headphone jack balance, more professional, more pleasant

- N5 is along with balanced and single-ended headphone output, than for single-ended and balanced output signal amplitude greater channel separation and driving ability has

improved, stronger anti-interference ability, can bring better sound quality

- JZ4760B + SA2000 + AK4490EQ audio architecture formerly rigid solution DSD format music, native direct reading ISO image. Supports WAV, AIFF, FLAC, APE, WMA, ALAC, MP3

audio formats, to meet a variety of needs to listen

- N5 uses AMK AK4490EQ DAC converter chip, can be in the PCM and DSD dual-mode state to realize stable operation of native playback decoding functions, with

OPA 1662 to achieve low-pass filter, AD712 as a voltage amplification, headphone amplifier part is using four BUF 634U as a current driver that provides 250mA current output,

excellent audio characteristics

- Be connected to the computer via USB cable, N5 can be used as a high quality USB DAC use, N5 supports PCM 192KHZ / 24BIT and DSD64 / 128 decoding, as a small desktop

decoder is very appropriate, we can give you the same satisfying sound effectsWhile not only maintaining compatibility with USB3.0 USB2.0’s, also has a greater bandwidth, up to

500MS / S transmission speed. Further USB3.0 interface faster recognition device, efficient power management to provide more voltage is needed, so that the device can be

completed faster charging, so that the host can be a faster identification device.

- Each slot support TF card expansion 128GB, expandable up to 256GB

 

Selling at $535

 

----------------------------------------------------------------------------

 

Cayin C5 Portable amplifier (New Arrival)

c5_g.jpg

 

Very nice and warm 3 Dimension sounding and yet powerful enough to drive nearly all kind of headphone with ease. Very well review in man forum and audiophile.

– Low noise and driving strong

– Touched the heart of the new design

– High and low gain, bass switch design

– Rated output power: 800mW + 800mW (32 ohm load)

– Life time: about 12 hours (32ohm load)

– Charging time: about 4 hours (off state, the use of DC5V / 2A charger)

– Lithium battery capacity: 1000mAh / 11.1V

Features:

1 dedicated high-performance audio op amp OPA134 and LME49600 buffercomposed of dedicated headphone amplifier, low noise, driving strong.

2 Japanese original ALPS volume potentiometer, durable and reliable, to ensure quality.

3 built-perfect protection circuit, with the midpoint of drift, switch machinenoise cancellation function, the outputusing relay protection,full protection of the amplifier and headphones.

4 can be used as a mobile power source to charge other mobile devices.

5 aluminum shell, effectively shielding interference.

6. subjective listening experience

 

Selling at $220

----------------------------------------------------------------------------

 

Cayin C5 Portable DAC Amplifier (New Arrival)

c5_dac_7.jpg

 

C5 DAC does not just amplify sounds simple, but began to improve from the sound source. Long Battery life and very power amplifier with great detail and well separated sounding

Through the built-in DAC functions, the timely introduction of the smart phone or computer as the source, can also get the Hi-Fi sound. 21 years of professional design and manufacture Hi-Fi Audio Hi-Fi accumulation and top material is the fundamental guarantee of good quality

– Computer USB decoding – up to 96kHz / 24Bit

– Support Android / IOS smartphones decoding

– Coaxial output

– Lithium Battery Capacity: 3700mAh / 3.7V

– Battery Life: about 19 hours (AUX input, 32O load)

– about 9 hours (USB input, 32O load)

– Charging Time: about 4.5 hours (off state, the use of DC5V / 2A Charger)

 

Selling at $285

Edited by littlemart

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...