siriuz
Senior Member-
Content Count
147 -
Joined
-
Last visited
Everything posted by siriuz
-
@kube: i was thinking to leave at 4pm after the talk by electrical and electronic engineering, but i think i'll sit through media and info comm, then meet you? i think this friday we head down to koba instead, you want to get all the parts and the amp parts also right? i didnt see any tube sockets at slt today actually i bought ferric chloride and blank double sided pcbs today. wanted to surprise you guys
-
yea i know can make with 4 diodes. i'll be going down to sls prolly this friday after SP career fair, so its ok =P i'm in no hurry, since the tubes aren't here yet. i was thinking 3VA like very weird leh, i do some mental calcs turn out like only around 0.1A. so i dunno why it write 0.3A. so i bought the 6VA one lor
-
oops! i think i getting senile slt become sls. then i forgot buy bridge rectifier. win liao! trafo is 6VA 15-0-15 , $4.30. i saw one 3VA one, say 0.3A. but then i see like so small, so i buy 6VA one
-
oops i forgot about da blok but nvm la hahaha i got the parts liao. total about $15 for the psu. i intend to use IEC socket for connecting, then can use the same power cables as computer. the sockets can get at sls most shops. koba should have also. i couldnt seem to find 11k resistor in sls so i got 2 x 22k to parallel instead. heater is powered by the ps, but its part of the tube. two of the pins on the tube, its not a separate unit.
-
oh ok! i thought it'd be getting the full 30v i mean, i'll be putting it together with the amp side because it'll be on the amp board. it'll still be tapped from the heater supply. yes i want a mean blue glow lighting up my tube
-
because of this review http://www.sgheadphones.net/index.php?show...indpost&p=60605
-
i going down to sls tmr to get the parts for the psu section, will finish psu section tmr, then wait until tubes arrive then i work on the other part. heres the parts list i've worked out for the psu section: 4 x 100uf 100v electrolytic caps 3 x 470uf 35v electrolytic caps 3 x 47uf 16v electrolytic caps 2 x rectifier bridges 2 x 1N4002 diodes 1 x 15-0-15 200mA transformer 1 x 7812 12v regulator 1 x 7912 -12v regulator 1 x LM337 regulator 1 x 2W TO-220 heatsink (for LM337) 1 x 2k2 resistor 1 x 1k3 resistor 1 x 11k resistor the 470uf caps i was thinking 35v abit low since 30v x 1.41 is 42.3v so i'll probably get 50v ones instead, dont think they'll cost alot more and it wont hurt either if you're wondering where the RLED and the LED went, i decided to put it in the amp section if there are any mistakes in the parts list please let me know
-
i didnt realise that was a sticky either ! i found it on google LOL
-
yea from what i've seen of the pictures and what i've heard in the thread, both squalle and kippei using "stripboard". not really "stripboard" since the traces are not strips? i think they're using perfboard / veroboard / <insert variant here>. i dont think its really that complicated if you lay it out nicely on paper first =P since it intrigues you, why not try it?
-
yea the tubes would be for the SOHA. yes its too late since there are only 3 tubes in the lot
-
hey squalle, you asked why NOS tubes were preferred? i came across this tube FAQ on headfi during some googling read the whole FAQ here: http://www4.head-fi.org/forums/showthread.php?t=121357
-
@kippei: this guy seems to be selling the tubes for the millett for cheap http://www.diyforums.org/phpBB2/viewtopic.php?t=10
-
i have opa2134 left over from my cmoy2 experiments anyway i think i'll stick to +/- 12v regulators, dont really need the extra flexibility
-
oh ok i think i'll start laying out the psu later. many people seem to have hum issue and most of it seems to stem from trafo placement. so i think i'll have the psu and the amp unit on separate boards and possibly in separate cases
-
what did you guys use as the CCS for the SOHA? where to get the LND150 arh?
-
what do you guys think of this: http://cgi.ebay.com/5963-4-NOS-NIB-Vacuum-...1QQcmdZViewItem
-
i see.. i can't get the 2SK389 and 2SJ109 for the dynalo in singapore either, end up i get from dgardner together with my boards. they cost a (few) bomb(s)! usd10 a pair, and i need 4 pairs for my dynamid
-
can't get the tubes for the millet?
-
so many tubes, kippei want to start tube amp business in singapore arh
-
how does the RCA tube compare to the GE that you guys are taking ?
-
http://cgi.ebay.com/PAIR-GENERAL-ELECTRIC-...1QQcmdZViewItem this one leh ?