littlemart
Audio Dealer-
Content Count
13 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout littlemart
-
Rank
Junior Member
-
Headphone SoundTech MC2 Headphone This is new kidz in the block to compete with already establish brands in the market. However you will never know there are always some decent brand start to establish especially this MC2 a very popular model in Mainland online store and has good review. High Performance, built and important value for money. Seldom see a headphone made with real wood at this price tag. MC2 is a great sense of music headphones , very balanced and accurate sound warm thick lip. MC2 earphone’s housing made using Argentina Green sandalwood , very simple classical flavor and texture . Argentina Green sandalwood texture clear looking, natural permanent smell. When you listen MC2 , you can feel a touch of sandalwood taste MC2 wooden arena retains the natural texture of wood , only doing polishing process without the use of any paint. Green sandalwood slow growth rate , every piece of timber more than a hundred years of age to become useful. Green sandalwood also known as incense , located in South America and is Argentina best quality green sandalwood. MC2 first beam using the German first layer of small yellow hand-stitched leather , rugged yet refined . Very mature calm feeling . MC2 weighs only 180 grams , earmuffs very soft , extremely comfortable to wear , no problem on prolonged listening MC2 custom 4N OFC headphone cable and gold -plated thickness 6.35 Adaptor . MC2 supporting two different thickness of the sponge cover ear sound as trimming purposes . – Thick sponge cover loose atmosphere low frequency , high frequency extension slender. More lively and assertive sound . – Thin sponge cover strong and powerful low-frequency , IF thick Run Naiting . Sound more feminine restrained . According to your personal preferences and the front-end equipment to go with the sense of hearing. MC2 impedance of 32 ohm , sensitivity of 96dB, extremely easy to drive and work well with mobile phone. Specification: Impedance : 32 ohm Sensitivity : 96dB Frequency response : 16Hz-22KHz Unit Diameter : 40mm Headphones Weight : 165g Cable length : 1.5m Headphone plug : 3.5 & 6.35mm Packing size : 260X240X70mm Package weight : 800g Accessories: * 2 headset sponge , sponge pads * 2, 6.35 adapter . Selling @$179 /each Review: http://forum.xitek.c...9024-1-1-1.html http://www.erji.net/...297&keyword=MC2 http://www.erji.net/...977&keyword=MC2 http://www.mydcentre...&extra=page%3D1
-
Aluminum Head Phone Stand Copper Colour - Single 1 Handcrafted sand and oxidation treatment. Aluminum Material. Size : 29cm(H), Base 12cm Selling at $30 Currently available in Black / Coffee / Silver / Gold / Blue / Pink Copper Colour - Single 4 Handcrafted sand and oxidation treatment. Aluminum Material. Size : 25cm(H) X 12cm(W), thickness 4mm, depth 8cm Selling at $40 - Currently available in Black / Coffee / Silver / Gold / Blue Copper Colour - Single 6 Height 28cm Selling at $40 - Currently available in Black / Brown / Silver / Gold Copper Colour - Single 8 Height 23.5cm Selling at $25 - Currently available in Black / Brown / Silver / Gold Copper Colour - Single 9 Handcrafted sand and oxidation treatment. Aluminum Material. Size : 26cm(H) X 16cm(L), Base 11.7cm Selling at $40 Currently available in Black / Coffee / Silver
-
AIBBC/Miu Audio Tube headphone/portable amplifier/Pre-amp
littlemart replied to littlemart's topic in Announcements/Offers
AIBBC TA-100 - Tubes Sabre 9018 DAC/Pre-amp/headphone amp/Bluetooth 4.0 (new arrival) TA-100 is a very complete ES9018S advanced decoder with XMOS (U8) + Headphone Amp + Bluetooth 4.0 (CSR BC8670) + Preamp Output. Having the highest level of decoding with built-in XMOS USB (U8) to support DSD hardware solution, using high end grade ops amp on amplifying circuit, the latest Bluetooth 4.0 CSR BC8670 programs to support lossless transmission APTX (I2S input receiving a digital signal decoding after ESS9018 preamp output) and a unique patented technology on tube hybrid system with full discrete between the core elements and the pre-amplifier circuit output. TA-100 (Standard version) is using IPF MUSES8820 + IV MUSE8920 ops amp and pairing with Psvane 12AT7 TA-100 (Premium version) is using IPF MUSES8820 + IV MUSE8920 ops amp and pairing with Psvane (贵族之声T系列典藏版) 12AT7-TII gold tubes Function: - DAC chip ES9018S, having 32BIT HyperstreamTM DAC patent structure, and the time domain jitter removal, as well as having a 135dB dynamic range and distortion of -120dB, the industry's highest level of performance for today. TA-100 has fully utilize the function of this chip, to satisfy the most demanding audiophiles. - COAXIAL input straight into ES9018S decoding, support for external high quality digital audio. - USB digital interface XMOS (U8) with the industry's highest level of 32BIT / 384KHZ ES9018S DAC decoder IC design, support DSD hardware solution, XMOS U8 decode the benefits of integration and DAC built-in USB digital interface is the shortest distance to get the best transmission sound quality. - The machine supports Bluetooth playback, with the highest levels of CSR8670 audio-specific Bluetooth chip, CSR8670 is the industry supports digital output of a high-quality 4.0 Bluetooth chip, the signal straight into ES9018S decoding, and support for APTX lossless transmission, powerful, excellent sound quality. - Input Select: CD / AUX / BT / USB / COAXIAL five audio input selections. - Output options: Headphone output / can control volume preamp outputs (balanced and unbalanced RCA outputs). - Fully discrete power amplifier configuration of high-fidelity headphone amplifier design, strong thrust, rear gain switch, 8-1000Ω impedance completely adapted. Selling at $499 (standard version), $599 (premium version ) -
Sense Audio / Racoon - Tube Headphone / Pre-amp/ Amplifier
littlemart replied to littlemart's topic in Announcements/Offers
Sense Audio SENSE G1 – Tube Pre-Amp/DAC/Headphone Amplifier A very Versatile mini Tube Pre-Amp/Headphone Amp with up to Coax/Optical/USB DAC function. Using pcm5102 decoder chip and many foreign crew were using this chip. USB input part of the upgrade is asynchronous 192KHz / 32bit receiver chip CM6631A, to facilitate access to other digital devices , increase fiber and coaxial digital inputs, retained line input and output analog signals, so can also be used as a STANDALONE DAC (For Headphone only) or Pre-Amp. - Class A Hybrid, Tube(preamp) + VMOS (power Field Effect Transistor chip) - OPT, COAX, USB, AUX input - AUX as Pre-Amp or DAC - USB using CM6631A, DAC using PCM5102 - USB Support mobile OTG for Android 4.3 and above - Tube use – Beijing’s 2P2J - Headphone amp slot 6.35mm and can support impedance range :32-300 ohm - Support up to 196kHz - Support 16bit-32bit Supports tube rolling (changeable with 1S4 /3S4 / DL92 / CV820 / 2P2 / 2N2N). Upgrade Tubes are available here Selling at $200 (Note power cord is not included) Deduct $15 off for Bundle with Audio Grade USB Cable (limited to 1 pcs only) -
Topping/ SMSL / Cayin Portable Amplifier DAC, DAP
littlemart replied to littlemart's topic in Announcements/Offers
CAYIN (Spark) Cayin (Spark) N5 DSD Lossless Music Player (new model) ” Fluid navigation. Great built quality. Beautiful exterior. Warm and detailed sound. The Dual Micro SD Card Slot came in handle” – The kind of feedbacks got from many N5 owner. - Carefully tuned Balance amplifier circuit - 2.5mm headphone jack balance, more professional, more pleasant - N5 is along with balanced and single-ended headphone output, than for single-ended and balanced output signal amplitude greater channel separation and driving ability has improved, stronger anti-interference ability, can bring better sound quality - JZ4760B + SA2000 + AK4490EQ audio architecture formerly rigid solution DSD format music, native direct reading ISO image. Supports WAV, AIFF, FLAC, APE, WMA, ALAC, MP3 audio formats, to meet a variety of needs to listen - N5 uses AMK AK4490EQ DAC converter chip, can be in the PCM and DSD dual-mode state to realize stable operation of native playback decoding functions, with OPA 1662 to achieve low-pass filter, AD712 as a voltage amplification, headphone amplifier part is using four BUF 634U as a current driver that provides 250mA current output, excellent audio characteristics - Be connected to the computer via USB cable, N5 can be used as a high quality USB DAC use, N5 supports PCM 192KHZ / 24BIT and DSD64 / 128 decoding, as a small desktop decoder is very appropriate, we can give you the same satisfying sound effectsWhile not only maintaining compatibility with USB3.0 USB2.0’s, also has a greater bandwidth, up to 500MS / S transmission speed. Further USB3.0 interface faster recognition device, efficient power management to provide more voltage is needed, so that the device can be completed faster charging, so that the host can be a faster identification device. - Each slot support TF card expansion 128GB, expandable up to 256GB Selling at $535 ---------------------------------------------------------------------------- Cayin C5 Portable amplifier (New Arrival) Very nice and warm 3 Dimension sounding and yet powerful enough to drive nearly all kind of headphone with ease. Very well review in man forum and audiophile. – Low noise and driving strong – Touched the heart of the new design – High and low gain, bass switch design – Rated output power: 800mW + 800mW (32 ohm load) – Life time: about 12 hours (32ohm load) – Charging time: about 4 hours (off state, the use of DC5V / 2A charger) – Lithium battery capacity: 1000mAh / 11.1V Features: 1 dedicated high-performance audio op amp OPA134 and LME49600 buffercomposed of dedicated headphone amplifier, low noise, driving strong. 2 Japanese original ALPS volume potentiometer, durable and reliable, to ensure quality. 3 built-perfect protection circuit, with the midpoint of drift, switch machinenoise cancellation function, the outputusing relay protection,full protection of the amplifier and headphones. 4 can be used as a mobile power source to charge other mobile devices. 5 aluminum shell, effectively shielding interference. 6. subjective listening experience Selling at $220 ---------------------------------------------------------------------------- Cayin C5 Portable DAC Amplifier (New Arrival) C5 DAC does not just amplify sounds simple, but began to improve from the sound source. Long Battery life and very power amplifier with great detail and well separated sounding Through the built-in DAC functions, the timely introduction of the smart phone or computer as the source, can also get the Hi-Fi sound. 21 years of professional design and manufacture Hi-Fi Audio Hi-Fi accumulation and top material is the fundamental guarantee of good quality – Computer USB decoding – up to 96kHz / 24Bit – Support Android / IOS smartphones decoding – Coaxial output – Lithium Battery Capacity: 3700mAh / 3.7V – Battery Life: about 19 hours (AUX input, 32O load) – about 9 hours (USB input, 32O load) – Charging Time: about 4.5 hours (off state, the use of DC5V / 2A Charger) Selling at $285 -
Selling a very mint condition Focal Spirit Classic Headphone in Box. As good as new. My friend used only once and after that not using any more. He has no time for headphone enjoyment. Unfortunately he has lose the receipt. Bought only recently and locally from retail shop at Suntec. $400 Price Firm. Not for fussy and low baller. Contact me only you are buying at this price. Contact me for the photo. Thank you Colour - Metallic Brown
-
Real Wood Note: The stand are carved directly from the real wood and the nature of the wood may not be perfectly line as well as the colour tone will be different from the picture and from stand to stand. Some patch works may have been perform by the supplier. The stand not for fussy or perfectionist buyers. Honestly I see the natural flaw of the wood a much more like a real wood with ‘artistic’ feel. You may not want to have something is too perfect either. Royal Glam – Handmade Solid Wood Stand Tired of seeing too many Omega type of wood stand selling in market and with varies pricing? Worried your expensive headphone band will stretch while placing on top of it over the time? No real solid wood feel and smell but only the veneer feel Royal Glam Handmade Real Solid Wood Stand Carved from solid black walnut and applied lays of Germany OSMO to wax the wood. The WoodLab Royal Glam stand puts your headphones on full display while eliminating cable clutter on your desk. Narrower than the human head even at its widest point, the whale-shaped design allows your cans to rest snugly without adding extra tension— so the headband won’t stretch out over time. It’s large and sturdy enough to fit virtually all models, but maintains a relatively small footprint. Choose the classic all-walnut version, or opt for a contrasting stripe of ash. Specs: – Come in Black walnut and Black Walnut with ash – Dimensions: 4.7 x 3 x 10.2 in (12 x 7.5 x 26 cm) – Footprint: 4.7 x 2.9 in (12 x 7.4 cm) – Curve at widest point: 4.4 in (11.2 cm) – Curve at narrowest point: 1.2 in (3 cm) – Weight: 1.9 lb (0.9 kg) Selling @$99 $55/pcs (Introduction Promotion. While Stock last). (Come with no box). I can give further discount for buying 3 pcs and above . You will not be able to see this price again once this batch is finish. Now even selling much cheaper then MASS DROP ---------------------------------------------------------- Real Wood Headphone stand - Hook Type Handmade using solid black walnut wood (you can smell the wood smell when place beside you). Beside can use for hang headphone, it can also be use for hanging accessories. Classic and Elegant looking. Plain wood base, allow user to do their own craving/drawing to make the stand more personal. Material : Black walnut / Red Oak (no stock) Finish: Biotherm wood wax Note : Simple assembly Size : Height 27.5CM ( including base ), Stick length 12cm, Base Diameter 11cm Weight: 180g Selling $36/pcs ---------------------------------------------------------- Real Wood Headphone stand - T Type Hand Made using solid wood(you can smell the wood smell when place beside you). Beside can use for hang headphone, it can also be use for hanging accessories. Classic and Elegant looking. Plain wood base, allow user to do their own craving/drawing to make the stand more personal. Material : Black walnut / Red Oak Finish: Biotherm wood wax Note : No assembly is require Size: height 26.7cm ( including base ), Stick length 19cm, Base 20cm Weight: 330g Selling $40/pcs
-
APPJ PA1502A – Mini Class A Headphone Amplifier Class-A single-end triode,100% tube amplification.Designed for resolution of fine musical details, expansive sound stage presentation, and lush tonal quality. Full aluminum enclosure/chassis Tubes: 1PC 6N4 – (Changeable to 12AX7; ECC83; ECC803) 2PCS 6P6P – (Changeable to 6V6) Input: RCA Jacks Output: 6.3mm Jacks Output Impedance: 8 to 600 (Japan Z11-EI48*24 Output Transformers) Selling at $315 Currently available in Black / Silver (Note: the standard package does not come with any power cord) ------------------------------------------------------------------------------------------------------- APPJ HPA Headphone Amplifier Adapter - New Arrival Convert your speaker tube amp to a headphone tube amp. Direct solution instead of getting another tube headphone amp. This matching is widely used, can be used in 6F3 EL84 6V6 6P3 EL34 KT66 KT88 2A3 300B or the equivalent power of the single ended, combined into a headphone amplifier, strong drive ability good special effects, can drive HD800 and other high-end headphones. Parameters: Input: 4.0mm Banana Jacks Output:High/low-impedance headphones,3.5mm and 6.35mm stereo headphones Support:8ohms-600ohms all headsets Processing power of 8W +8 W Support: 6F3 EL84 6V6 6P3 EL34 KT66 KT88 2A3 300BGewith the same power single-ended tube amp Selling at $110 Come in Black/Silver
-
Topping A30 - Desktop Amplifier (New Model) Overview: - Two outputs for different impedance of the headphone: 3.5MM and 6.35MM headphone port, can be used for a variety of headphones and earbuds. - Two kinds of operating voltage mode and three kinds of gain (0dB / 9dB /18dB) selection mode. - A30 uses the high-performance TI HIFI chip OPA161, OPA2134 (changeable) and TPA6120. - Maximum output power of A30 can reach up to 1551mW * 2. - Aluminum body, each part is through high automation, high-precision machining creating (Laser engraving). - Power by a special customized three-way high-performance linear power supply Most competing products use 1x15V or etc adapter to the amplifier, this 1x15V will be convert inside the amplifier and cause noise and interference. But we use linear power adapter to provide 2x15V and 1x8V to A30, which help A30 avoid these problem. 2x15V used for high fidelity headphone amplifier circuit. 1x8V used for MCU, LED and relay. Less noise, less interference. - Using Hi-fi grade NEC relay, WIMA capacitance, Nichicon FW series HIFI electrolytic capacitor, ALPS potentiometer etc Specifications: Analog input 1 x RCA (L + R) LineOUT 1 x RCA (L + R) Headphone output 1 x 6.35 headphone jack; 1 x 3.5 headphone jack The recommended load impedance range: 16-600Ω Maximum output power: 1551mW x 2 (PO = Hi, 6.35 headphone port, RL = 32Ω, THD + N = 1%) 291mW x 2 (PO = Hi, 6.35 headphone jack, RL = 300Ω, THD + N = 1%) 152mW x 2 (PO = Hi, 6.35 headphone jack, RL = 600Ω, THD + N = 1%) 757mW x 2 (PO = Hi, 3.5 headphone jack, RL = 32Ω, THD + N = 1%) 258mW x 2 (PO = Hi, 3.5 headphone jack, RL = 300Ω, THD + N = 1%) 143mW x 2 (PO = Hi, 3.5 headphone jack, RL = 600Ω, THD + N = 1%) Selling at $170 Come in Silver Topping NX5 (new model) AD8610+BUF634 high performance combination Every sound channel of Topping NX5 use low noise HIFI Operational amplifier AD8610 of American ADI as Signal amplifier. Every channel use one piece of BUF634 as output buffer of output circuit. Mega bass low Battery LED alert USB intelligent Charging 2400mAh large-capacity battery 30hr playback time Come in Black/Silver Color' Specification: Weight:138g Size:108mm*60mm*13mm Analogue audio input port: 1*3.5mm Headphone input port: 1*3.5mm Full battery woking hours: 30hours Output Power: 292mW (RL=16Ω,THD+N=1%) 285mW (RL=32Ω,THD+N=1%) 193mW (RL=64Ω,THD+N=1%) 95mW (RL=150Ω,THD+N=1%) 51mW (RL=300Ω,THD+N=1%) 26mW (RL=600Ω,THD+N=1%) Voltage range:11.1Vpp SNR: 122dB(RL=300Ω,Gain=L) 116dB(RL=300Ω,Gain=H) Input sensitivity: 3.85Vrms(Gain=L) 1.40Vrms(Gain=H) Gain:+0dB(Gain=L);+8.9dB(Gain=H) Frequency Response: 10Hz-200KHz Suitable Headphone Impedance: 16-300Ω Min THD+N:0.0004%(RL=300Ω,Gain=L Pout=40mW) Selling at $180 Topping NX3 (New Release) Topping NX3 Portable Headphone Amplifier Following the very popular NX1 portable amplifier, Topping launch another value for money portable amplifier NX3. Internal amplifying chip using TI TPA6120A2 which is currently use in the very costly SONY’s PHA-3 which price over $1000. TI TPA6120A2 amplifier chip OP Amp – OPA2134 Mega bass low Battery LED reminder USB intelligent Charging 2400mAh large-capacity battery 25hr playback time Come in Black/Silver Color Specification: a) Output Power: 103mW@ 16ohm load 98mW@ 32ohm load 30mW@ 25ohm load THD+N: <0.0031% (32ohm 5mW) <0.0032% (32ohm 20mW) c) Frequency Response: 20Hz-20kHz d) Suitable Headphone Impedance : 16-300 ohm f) Noise: <9u V (Gain=L) g) Dimensions: 66mm X 108mm X13mm h) Weight: 145g Package: a) NX3 X1 b ) Audio cable X1 c) USB Charger Cable X1 d) Silicone Band X2 f) Velcro X5 Selling @ $110 Topping NX1 Topping NX1A (new model) The Topping NX1A (NX1 upgraded version) has been designed for MP3/MP4/mobile phone/computer that can not get best effect of high impedance from the headset due to the low power. NX1A keep same circuit and component of NX1 to keep a same sound. But after modifying other part to save power, NX1A’s playback time up to 150h, that’s 50% improvement of NX1. It takes less than 3 hour to fully charge the battery. Even 5 minutes charge could provide 10 hour playback. Its USB charging port has been enhance to be able to use standard Micro Usb cable for charging 100mW*2 output power. Built-in rechargeable lithium battery, approx 150 hours playback time. Selectable gain (H & L) Use high quality components to get better performance. WIMA capacitance, EPCOS capacitance and ALPS potentiometer Small size Selling at $75 ———————————————————————————————————————– SMSL SAP-5 Upgrade version from the previous popular SAP-4 Portable Headphone Amplifier with Bass boast Smart and lightweight Using replaceable Nokia battery with run time: 40+ hours Selling at $75 Currently available in Black
-
Miu Audio iH2 – Tube Portable Headphone Amplifier (New arrival) The circuitry is carefully design the in order to make the smallest casing but still provide an audiophile quality tube headphone amplifier for the market.Very very small in size and Elegant looking Tube Portable amplifier. A decent Tube portable amplifier easily cost over $1000. Nice sounding especially it comes with a Jan Philips JAN6111WA Tube. This is an improve version 2 from the previous version Vacuum Tube: Philips JAN6111WA Compact size with built-in re-chargable 2200MHA Lithium battery. Super silent circuitary Audiophile-graded parts and components Sound field selector for different music enjoyment Pack inside a Elegant Piano Finish Wooden Box Selling at $699 ------------------------------------------------------------------------------------------------------------------- Miu Audio MKTP-1 – mini Pre-amp with Headphone amp Tubed preamplifier with headphone amplifier. With its fashionable iridescent color design and very small dimensions, the MKTP-1 is one of the world’s smallest and most beautiful pre-amplifiers! It a prefect match with the mini power amp Miu Audio MKP-1 as well as to all other mini integrated amplifier of your choice. Pre-amp helps to give extra gain to the power of your amplifier should you think their power is not enough Only 65mm x 25mm x 98mm. Front panel jacks for headphones and iPod/iPhone/MP3 inputs. Rear panel connections for power amplifiers, as well as rear panel line level input for CD. Ideal complement for headphones, iPods, MP3 players and more. Can be used with powered speakers for a complete system. Perfect for obtaining better sound from your PC. Spectacular audio performance! using 6922EH Pre-amp Tube *Supports two major tube series: (1) 6DJ8, 6922, 6N11, 6H23n, ECC88, E88CC, etc., and (2) 12AU7, 5963, 5814, ECC82, etc Selling at $160 --------------------------------------------------------------------------------------------------------------------------------------- Miu Audio MKTP-2 Spectacular audio performance which a open sounding with good separation. Do not be deceive by the look of this little tube amp. You will not believe it is SO POWERFUL that will Blown You Away ! Easily can drive speaker the like of Dynaudio which has 84DB and is Fun to play! TA2024 Tripath Class T Amp 2*15W output power Tube* use – 6922EH (Electro Harmonix Russia Tube) Can use as tube integrated amplifier/PreAmp/PowerAmp and it has headphone amp Front panel jacks for headphones and iPod/iPhone/MP3 input, rear panel connection for line level input An ideal match for quality loudspeakers with efficiencies of 84-88 dB or more Very mini in size – Only 65mm x 60mm x 98mm *Supports two major tube series: (1) 6DJ8, 6922, 6N11, 6H23n, ECC88, E88CC, etc., and (2) 12AU7, 5963, 5814, ECC82, etc Selling at $260 (with 6922 EH tube) Currently available in Black / Orange / Silver-Blue ———————————————————————————————————— Miu Audio MKTP-2 MKII Spectacular audio performance which give warm sweet, silky sound throughout the mid and high frequencies. Do not be deceive by the look of this little tube amp. You will not believe it is SO SO POWERFUL that will Blown You Away ! Easily can drive a speaker like Dynaudio which has 84DB and Fun to play ! TPA3106D2 Class D Amp 2*25W output power With Gold plated speaker binding pole Tube* use – 6922EH (Electro Harmonix Russia Tube) Can use as tube integrated amplifier/PreAmp/PowerAmp and it has headphone amp Front panel jacks for headphones and iPod/iPhone/MP3 input, rear panel connection for line level input High Power an ideal match for for wide variety of quality loudspeakers Very mini in size – Only 65mm x 60mm x 98mm *Supports two major tube series: (1) 6DJ8, 6922, 6N11, 6H23n, ECC88, E88CC, etc., and (2) 12AU7, 5963, 5814, ECC82, etc Selling at $295 (with 6922 EH tube) Currently available in Black / Orange / Silver-Blue / Gold ———————————————————————————————————— Miu Audio MKUP-2 – Hybrid 6922 Tube Amplifier 2*25W with MM Phono (New Arrival) Tube integrated amplifier with Phono preamplifier. The tube preamplifier section is completely separate from the power amplifier section, Phono preamplifier MM—1 input Line and 1 input Phono. Chassis slightly bigger then MKTP2 - TPA3106D2 Class D Amp - 25wpc + 25wpc @ 4 Ohms, 18wpc + 18wpc @ 6 Ohms, • 12wpc + 12wpc @ 8 Ohms. - Front panel jacks for headphones and iPod/iPhoneMP3 inputs, input to line level input.l Selector Line/Phono. - Rear panel connections for LINE input, PHONO input and speaker outputs - High power allows for use with a wide variety of quality loudspeakers - Spectacular audio performance! - Very compact in size – only 75mm x 70mm x 110mm. *Supports two major tube series: (1) 6DJ8, 6922, 6N11, 6H23n, ECC88, E88CC, etc., and (2) 12AU7, 5963, 5814, ECC82, etc Selling at $399 Currently available in Orange
-
Miridiy G3 – Class A Hybrid Headphone/Pre-amp Miridiy Class A Hybrid Headphone/Pre-Amplifier It is a high value and cute headphone amplifier hook up to your PC / Mp3 /MP4/ ipod / any stereo device. You can have a powerful, dynamic and sweet TUBE SOUND from your headphone ! You’ll be astounded at the improvement in sound quality, dynamic range, meticulous transparency, completely demonstrate its high performance and analytical ability, it can also connect with power amplifier such as a high performance pre amplifier to improve your Hi Fi system. It a prefect match with the mini power amp Miu Audio MKP-1 as well as to all other mini integrated amplifier of your choice. Pre-amp helps to give extra gain to the power of your amplifier should you think their power is not enough Pure Class A Headphone Amplifier & Pre Amplifier Hybrid ! Valve & MOS-FET in Use!! Without any OP amp IC inside!!! Audiophile Performance Design Absolutely!!! G3, it has improve from last version which was OEM to Indeed-Hi Fi (G2 Valve Class A Hybrid Headphone/Pre-Amplifier). And alot of copy and similar product following them, so they are also keep a distance with our technical skill.We have modified to generation III now, so that we call it G3. Easy to change the tubes with jumper on PCB (bias adjust is necessary), 6 series for 6DJ8/6922/ECC88/6N11/6N23P; 12 series for ECC82/12AU7/12AT7/6N4…… Selling at $150 (standard EH6922 tube), $165 (with Gold EH6922 tube) ———————————————————————————————————— MiriDIY B5 Tube Buffer Transform your CD player to be a Tube CD player! Transform your DAC to be a Tube DAC! Give the extra warmness to the sounding. Affordable Tube buffer and Fun to play! Connection : CD / DAC / other audio source -> B5 Buffer – > Amplifier B5 tube buffer / gall preamp gain is approximately equal to 0dB. It has very low distortion , so that your system has a very clean sound and better dynamic range Can effectively filter out the remaining digital audio signal and give comfortable smooth sweet and mellow warm sounding a) Changeable with series for 6DJ8/6922/ECC88/6N11/6N23P (plug and play); 12 series for ECC82/12AU7/12AT7/6N4 (with changing of jumper and need professional equipment to adjust the voltage if change to 12 series) Selling at $145 (with standard EH6922 Tube, $160 (with Gold EH6922 tube)
-
SG-300 This is a Tube Pre-amp with USB DAC + Headphone Amp. Naiting sweet sound all thanks to the high quality PSVANE tube. Thick solid low-frequency, low-frequency powerful. Beside using as headphone amp, it a prefect match with the mini power amp Miu Audio MKP-1 as well as to all other mini integrated amplifier of your choice. Pre-amp helps to give extra gain to the power of your amplifier should you think their power is not enough. Using CS4398 DAC, TI TPA6120A2 (headphone amp) USB, AUX input Tube pre-output Tube use – Premium GOLD PSVANE 12AT7-T II (贵族之声) 2 headphone amp slot (6.25mm/3.5mm) and can support impedance range :8-1000 ohm Support 32kHz-96kHz Support 16bit-24bit Supports tube rolling (12AT7, ECC81, 6201, GT-12AT7, 6C22D etc. etc. ) Selling at $195 ----------------------------------------------------------------------------------------------------------------- SG-100 Strong thrust, easily drive all headphones. Provide a high level audio resolving power and give a very sweet and warm sounding that will let you enjoy this little amp alot. NXP TFA9815T high-efficiency Class D digital power chip supporting up to 25W*2 output power. TE7022L USB support 24bit/96kHz, using an CS4398 DAC chip to decode. TPA6120A2 Headphone-AMP support impedance range from 8-1000 ohm Built in Power supply Selling at $165
-
Gustard H10 Class A Headphone Amplifier GUSTARD engineers insist that H10 better than A1 Lehmann. A 20-year electronics research and development work experts. Of course, everyone’s feeling is not the same. Class A headphone amplifier with high current current output. For each channel in the amp it has 2 independent amplification circuit. The H10 features two independent amplification circuits for the left and right channels, four gain switches, two RCA inputs, and two balanced XLR inputs.. There are 4 pre-buffer adjustment functions build in with the amplfier and that mean the amplifier using pre-stage buffer and main amplifier components. By using 4 paris audio power tube output circuit, the H10 could easily drive variety of different impedance headphones. The Gustard H10 built in with 2pcs 25W transformer and they correspond left and right channels power supply and highly reduce the channel crosstalk. Technical Specifications: Signal Input: 2x XLR female, balance 2x RCA, unbalanced AC115V/230V international voltage input Maximum input level: +21 dBu, impedance 10kohm Input impedance: XLR: 10kohm, RCA: 68kohm Input Sensitivity: +6 dBu Main amplifier gain: +8 dB Main amplifier gain adjustment range: -4 / +2 / +8 / +14 / +20 dB Frequency response: 0-55kHz (-0.5dB) Damping Factor:> 400 @ 50ohm Dynamic range:> 128dB (A-weighted) Background noise: <-100dBu (A-weighted) THD + N (1kHz 1W @ 100ohm): <0.00035% THD + N (1kHz 0.5W @ 32ohm): <0.0007% Crosstalk:-110db (1kHz) Headphone Output: 1x 6.35mm TRS Jack Power supply voltage: 230V AC/115 AC; 50/60Hz Power consumption: < = 20VA Machine Standard: GB a three-prong power cord Machine size (not included prominent part): length × width × height = 273mm × 190mm × 70mm Weight: Net Weight 3.3KG, including packaging 4K Selling at $525