jtfoo 0 Report post Posted December 31, 2003 Agree here with Firefox, for audio, you gotta use a log pot. It's the way our ear detect loudness, that a log pot would give reasonable increment with every turn. But $50 for the pot for your project, imho, is overkill. Try law faking your existing pot(i.e parallel a resistor from wiper to ground). Try a 2.2K resistor for a 10K pot or 22K for 100K pot. Though not perfect log imcremental, but good enough for me. Share this post Link to post Share on other sites
Firefox 0 Report post Posted December 31, 2003 IIRC, it's 15% of linear pot value. Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted December 31, 2003 i hav a 50k pot what resistor value should i use? 8.8k ? Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted December 31, 2003 That's still fairly low impedance. 2x gain is still enough if your portable throws out 1.6v RMS from the line-out. i hav tried low gain before on a Cmoy, it got very disstorted when tried it with my HD570 (130ohm) with the porta pro and low gain , it sounds like no amp , hav to increase the volume on mp3 player by about 40% still trying to find a balance here Share this post Link to post Share on other sites
jtfoo 0 Report post Posted December 31, 2003 (edited) IIRC, it's 15% of linear pot value. I've used 2.2K for 10K pots and the incremental is alright.. I took my reference from Rod Elliot's article when I was doing my project. http://sound.westhost.com/pots.htm#chg-law But 15% I guess would still be alright.. Edited December 31, 2003 by jtfoo Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted December 31, 2003 didn't hav the exect values, so tried it with a 10k resistor on 50k pot, it improved the increment a little, but caused disstortion to the music Share this post Link to post Share on other sites
jtfoo 0 Report post Posted December 31, 2003 (edited) Law faking shouldn't cause distortion at all. Might be something else. Edited January 1, 2004 by jtfoo Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted January 1, 2004 Law faking shouldn't cause distortion at all. Might be something else. could it be my gain level? it was 6 when i tried law faking on the test Cmoy Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted January 3, 2004 (edited) the "Pot-Racer" monster A47 variant has been cased the Altoids tins were more difficult to find then the components can also see my new mini Hammond case really cute, its even smaller then the Altoids Edited January 3, 2004 by tropicalrips Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted January 3, 2004 (edited) i hav made some minor changes to the amp can see the "turbo couplers" beside the power caps? Edited January 3, 2004 by tropicalrips Share this post Link to post Share on other sites
garc 0 Report post Posted January 4, 2004 hoi! stop teasing already when can I buy 1 of your amps Share this post Link to post Share on other sites
garc 0 Report post Posted January 5, 2004 (edited) Bought the Altoids amp from tropicalrips, happy with my purchase thanks Tropicalrips You guys should check out his mini hammond amp very cool Edited January 5, 2004 by garc Share this post Link to post Share on other sites
tropicalrips 0 Report post Posted January 7, 2004 (edited) made another A47 variant its the baby brother of the Monster bought by Garc hopfully this amp will make it to the meet before someone else buys it Edited January 7, 2004 by tropicalrips Share this post Link to post Share on other sites