edwinywh

SGHeadphones T Shirt - I'll be sporting then. 1. Roasty x1 M 2. joi-ful x1 M/L 3. That dude x1 XXL (really...) 4. Proton x1 (M, what colours are available?) 5. dle4e_2005 x1 S/M 6. ahdui x1 L/XL 7. zonalblitz_audio x2 (for now) L 8. kehyi x1 M/L 9. Theatre Of Dreams x1 L 10. Zephyron X 1 (Size L) 11. yotiao x1 S; x1 M 12. heady x1 XXL (ok, that_dude, join u) 13. Qsilver x1 S 14. clemo x1 M/L 15. Username x1 S/M 16. afbug X 1 L (Black if possible) 17. Ballack x 1 L (heck, let's add it in first later then talk) 18. Scanfiend x2 (L or XL, depending on the size) 19. Gfgfmoses *2 (black if possible, one M and one XL) 20. kross X1 (XL) 21. rko x2 (XL or XXL, depending on size.) 22. xErTiNi x1 S/M 23. cocobean x2 XXL (Black if possible) 24. edwinywh x1 L

yO`,can i have this polo t too? I would wan a L size. =) Any nick imprint on the tshirt,btw?

Yeah,I took out all the tubes and cleaned it already. A couple of times in fact.But the buzzing sound still there leh.... Its not really loud till very audible,but in a quiet room at night,it is obvious its there.

Hehe,yeah... It sounds really kua zhang to spend so much for a tube. But I would say its because of the age of this tube plus the quality of cos. I got one of this tube too and I would say its quite justifiable for the money.The results is good. I hear more details.Quite a lot of difference I would say from the stock tube.

In regards to the previous post about buzzing/static kind of sound from my 708B in previous thread : Quoted by zer061zer0 : "Whats ur source..? The last time i uses the ibook i also got the same problem.. i heard a buzz sound, when i remove the 6n1, replace it and it should be gone. With my cdp as a source i don get the noise anymore, sometime got soft hiss for a while but only detectable by my "SCope" , my gf. she seems to have more sensitive ears to detect very slight noise and was able to pin point it.. " Hi,my source is my xbox as cd player. Weird as it might sound,but sound quality is quite ok to me. haha... of cos will get a better one when i got money. =) The buzzing sound I'm afraid is not cause by the inputs. I 80% sure it comes from the power supply section.

ooh,so u hear the buzzing sound from the left ear too? Actually,I just noticed that,even when i replaced the 6n1,the buzz is still there. Though its much softer,but its still there. I heard it now,(1.08am).I off my fan,everything and press the left sidie near to my ear... and there it is... that static,noise kind of sound. Can somebody help me clear this noisy thing? Its not obvious,but its there.And I dun wan it to be there. =(

Hi guys,another thing to share. As mentioned in headfi thread about the 6N1 tube that its just there for show,right?I did take it out to experiment. True enough,the amp is still working fine.With nothing bad going on.No effect on the operation. However,I noticed a soft buzzing,static sound coming out from my left headphone. I thought it came from the tubes,so I removed and reinstalled it. But the buzzing sounds continue. To further isolate the problem,I turn up the volume and off. To my surprise,the volume of the static/buzzing sounds doesn't goes up nor go down when i turn the volume knob.The buzzing sound is still there when i turn down the volume knob. Then I suspect the 6n1 that i removed.So i installed it back and true enough,the buzzing/static sound is gone. Thus,I conclude that the power supply link to the 6n1 is causing the static/buzzing sound. Next thing that I wanna do is still,to remove it. But,this time,I'm thinking of either shield it or just cut the wires link to the 6n1. Which method will be better? Can some experts pls advise me??

Yeah... but if the tubes are really so good,i wun mind paying a few more bucks to get it here man. hehe..

haha.... no worries,no soldering need for beginners. I din change and capacitors or any circuitry either. Just buy some tubes and have fun! If u searched around ebay,theres lots of GEMs tubes out there....

WAH! serious? so cheap? most of us i think bought at much higher price than this. Well,I did. And I like this amp alot. Lots of potential. Lots of mods to play around. Great amp. Check with the seller more about the amp before biding. =) BUy buy buy! Join us,the 708B gang. Hahaha...

Hi! Well,I do connet my IMAC to my headphone before. Basically I seldom listen straight from the cd in the mac becos I feel that its very much louder than i listen in mp3 formats.Thus,I hear more noise and I dun really like it.I normally reipped it into my itunes to be transfered into my ipod. =) However,back to wat u are saying.... For me,I dun experience the singer being behind the instruments competing with the music etc. The differences between my mac and my xbox cd player are the extra details of the instruments and the whole song,and the enlarged soundstage.Lastly,the volume is higher from the xbox cd player than my mac too. =)

eh,i would say depends on wat u wan to hear most? Quality of sound or the details? 6922 will affect stuffs like soundstage,different "flavours" of sounds. 6n3 will affect stuffs like gain.. therefore.. more details if higher gain? not to mention higher noise level too. =) Well,above are wat i observed when i changed the tubes. =)

Dun know leh... got to try loh.. I feel like trying a pair of mullards.. hehe

yeah,I will go try change to a better power cord too. =) BTW,share with u guys that i encounter.... I was hooking up my xbox to make it as my cd player and after hooking it up,I noticed theres a loud humming noise. Surprisingly when i touch the interconnects that goes into the 708B,the noise disappear. So i connected some wires and short it to ground and now the noise is gone for good. Hehe....

My 708B is currently fitted with the Siemens tubes and WE 2c51. =) Happy combi,but still not very satisfied. I wan more!! Haha...

Well,some guys in headfi mentioned got difference leh... do u find that theres a improvemnt in the sound quality? I do know that adjusment to the power supply can have big difference in sound quality,hence people spend big bucks on good power cord etc.....

Yah,I noticed that the wires connected to it comes from the power supply section.And nothing goes out from the 6n1 tube liao.

I am interested to change the caps to better audiophile quality. Can recommend some and where to get pls?? BTW,I feel that the bass of this amp is not really punchy and loud enough. How do I improve on the bass??

hey yO`! Great for u. Happy listening and look out for more surprises that u can hear now. =)

u mean 6922 to replace your 6n1 tube? that wun work. Yah,I saw on the headfi they used those military grade tubes.

I'm using the cable I got from LHS,Sim Lim Tower,the place which some forumers here recommended. But I believe my cable isn't that fantastic.. Its Furutek high grade OFC kind of cable.Quality wise... It doesn't really sounds the kind of transparent to me. But its definately an upgrade from the normal cable I got from Harvey Norman or those kind of normal shop.

This Western Electric is quite ex to me. It cost $90 for 1. I din change the 6N1 cos I wanna change the tubes slowly to test out the effects on the tubes. Perhaps sooner or later I will change it.Somehow,feels that the stock tubes aren't really that good enough. Hee... Or maybe its just me. Anyway recommended tube for 6N1 though?

Yup,I have changed a couple of the stock tubes.... First tubes I changed is the 6N11 becos the left channel tube kind of burnt out... it goes softer and softer after some time of power up and listening. I went to Well Audio at Bugis and the friendly uncle recommended me a pair of Siemens E88CC. It has indeed improved the details quite tremendously.I have never heard such nice strings and details highs before.The soundstage has enlarged too. Cool! Next, I changed the 6N3 to Western electric 2C51 tube made in the 50s. It has further improved the details and soundstage even further!! I hear even more smaller background detail! Eg, I hear the soft organ played in the background in Coldplay's Speed of the Sound which I never hear before and didn't even know it exists! I'm a happy listener with my 708B. However I'm sure that theres more potential to this little amp. Hope the 708B's owner can provide more info on improving this amp further. I'm using a pair of Grado's SR80 which I feel has already been driven to its max already.Wondering if 701 will be good match to 708B. =) My system is simply plugged from my Mac to the Amp and to my headphones.

Hmm,I'm interested to know more about the 701 too. Thinking if it will be a good match with the Xiang Sheng 708B?

Oh man,I feel like the matchsticks are going all over my body! YUCKS!!! Eeeky!!!