DemonicAngelz

BUMP!!!

BUMP!!!

bumps......

updated first post

Added pictures

Description of Item : K701 stock SOLD ________________________________________________________________________________________________________ Description of Item : HD650 SOLD ________________________________________________________________________________________________________ Description of Item : DIY HD650 7N UPOCC cables. Can fit any headphone using the Sennheiser connectors, such as the HD25-1 Condition : 9/10 Warranty : Nil Selling price : $90 Used 7N (99.99999%) UPOCC Copper Wire, 26 AWG. Cables are braided and terminated using Canare F-16 plugs, one of my favorites due to the durable nickel-plated solid brass handle and spring for tension relief. Sennheiser plugs from Cardas, heat shrinked to prevent cable breakage. Total cost is $25 (sennheiser connectors) + $5 (F-16) + $10 (heat shrinks) + $50 (wires) = $90. If anyone wants to take over this cable from me feel free to PM me. I sourcing for funds to try out other cables, next up would be a gold/silver mundorf mix. ________________________________________________________________________________________________________ Description of Item : DIY HD650 Silver cables. Can fit any headphone using the Sennheiser connectors, such as the HD25-1 Condition : 9/10 Warranty : Nil Selling price : $150 Features: [li]24AWG 99.99% pure silver wire[/li] [li]Air/Teflon sleeving[/li] [li]Grey nylon sleeving[/li] [li]Cardas Sennheiser plugs[/li] [li]Neutrik gold plated 1/4" plug for termination[/li] [li]3% Silver solder[/li] ________________________________________________________________________________________________________ Description of Item : Stereo Stepped Attenuator (23 steps) Condition : 9/10 Warranty : nil Selling price : $75 Please take a look at this page for more information and assembly instructions. This comes as a KIT, unassembled. Bought originally for my B22, but since have sold it off as I have to time to build it. It is at 100k ohm attenuation values. Great upgrade for the amp you are using now it still uses pots for volume control. Components are from Vishay/Dale, one of the best resistors you can get for audio products. ________________________________________________________________________________________________________ Preferred Location : to be discussed Preferred Mode of Contact : PM to discuss

Basically looking for a budget balanced DAC and amplifier set that is around the price of $800. If you have such a set for sale, feel free to PM me to discuss. Not looking for combined DAC and amplifiers though. Anyone willing to share shipping and order direct from little dot in china welcome to pm me too. Note: This is a WTB (Want to buy) thread.

As per title. Using it to print wording and designs on metal enclosure

SOLD~

OH my issit? I can't remember already Anyways this set is reserved at $130

==MOD EDIT== Please note that auctions or bids are not allowed in the forum. Please read the rules. Thank you.

Description of Item : Selling a set of Mini³ DIY amplifier kit. Includes the board and materials ordered from the AMB website and other materials bought myself. I just haven't got the time to fix it, and I just realized my soldering iron had broken down. What you will get is: PCB - Mini³ printed circuit board L1L, L1R, L1G - Ferrite beads B+, B- - one set of board-mount battery contacts Vol/Pwr - Alps RK0971221Z05 10KO stereo potentiometer with SPST switch U3 - TLE2426CLP precision rail-splitter TO-92 D4 - BZX55C12 12V 500mW zener diode DO-35 J1 - DC power jack 2.5mm pcb-mount J2, J3 - 3.5mm stereo mini phone jack, pcb-mount, isolated U4 - OPA690ID operational amplifier SOIC-8 U5 - AD8397ARDZ dual operational amplifier SOIC-8 R1L, R1R, R1G, R3L, R3R, R4G - 6x 330Ω miniature 1% metal film 1/8W resistor R2L, R2R - 2x 100KΩ miniature 1% metal film 1/8W resistor R4L, R4R - 2x 1.5KΩ miniature 1% metal film 1/8W resistor R5L, R5R - 2x 6.2Ω miniature 1% metal film 1/8W resistor R6 - 5.6KΩ miniature 1% metal film 1/8W resistor R7 - 10KΩ miniature 1% metal film 1/8W resistor R8 - 75Ω miniature 1% metal film 1/8W resistor C2 - solid dipped tantalum capacitor 10μF 25V C3a, C3b - 2x aluminum electrolytic capacitor 470μF 16V C4, C6, C7+, C7-, C8+, C8- - 6x multilayer ceramic X7R capacitor 0.1μF 50V C5+,C5- - 2x aluminum electrolytic capacitor 100μF 25V U1 - LM317L voltage regulator TO-92 U2 - 7812 voltage regulator TO-220 D1, D2, D3 - 3x 1N4001 1A rectifier DO-41 LED1 - 3mm Red LED LED2 - 3mm Blue LED Hammond casing Volume knob Walwart In summary, that is everything you need to make the Mini³ DIY amplifier without the battery which you can get yourself. I took over one week to collect all these materials. Condition : 10/10 Warranty : Nil Selling price : $65(NEG) Preferred Location : Near orchard MRT station

sold

But if you break the pins...

closed

Want to sell a used FUBAR III USB DAC + AMP. I decided to use my sound card instead of the amp. Willing to sell at $310. Amp + cables only. No box. No receipt too.

sorry. sold

Cool. Sorry for the hold back if it was my fault ppl.

deposited.

I just logged on. I am sorry to have caused so much trouble. I was not able to log on lately. If it is not too late mouz, I would pay you today. Pls reply. Sorry to hold back the MO.

I am using the same cable from Sennheiser as well

You can try the Sennheiser HD25-1 if you want and can find it. Its not bad.

Description of Item : Black tomahawk Condition : 8/10 Minimal or no scratches. Used for about 4months Warranty : By Jaben. About 6mths more I think. Selling price : $440 Preferred Location : Near Jaben tomorrow. Preferred Mode of Contact : PM me. Great amp. Nice interconnect. No more hassle of having to use a dock with mini to mini jacks as this one comes with a mini jack and ipod line out. Receipt would be provided. Hope to deal tomorrow. PM me now or leave a reply or hopefully contact details.

Willing to let go at $160.

Its about $720