Darkkopi

recable it!

Yes, based in Australia. Its up to yourself on what you want to build. The B22/B24 can be very affordable to very expensive depending on the parts you use.

You'll only get cheap price for casing and CNC if you order alot, there's no way the company will give you a cheap price for 1 order. Heatsinks you can use Conrad. Using top quality parts, you got to source them online yourself, through farnel, mouser, digikey etc. If you're still unsure, It's better not to start on the b24 imo. Its a huge project.

check the headwize thread, there's a BOM there. After that, go farnell/mouser/digikey and calculate the parts A good casing with CNC will be at least $500.

doubt you'll need the 100W unless you're in a club! and it won't be cheap

Finally found this album! It was out of print and took me some time to find it, love her vocals!

b22 can only power efficient bookshelfs, and you need to use bigger heatsinks too or it will get very hot. B24 is better for speakers

Balancing Act?

Boards are done! Had some time so my friend wired up 3 channel for a test run. Just waiting for the backplane to come now so I can start designing the case!

This is what I normally use for events, marching classical for VIP entrance, single instrument classical for every other things. You can hardly go wrong with this, usually I stick with piano, since it's the easiest instrument to listen to. Having too many instruments in a music will distract the crowd imo and they'll find it irritating rather than smoothing.

It's cheaper here, by about ¥3000 and still in stock! http://www.hmv.co.jp/en/product/detail/3614239 I always get my Jap CDs from there, takes abt a day(if lucky) or 2 to arrive.

get it and review for us!

bought this and the best of David Lanz few years back! Always used it during my school's assembly, It's good being in-charge of the school system

Thanks! Ops, I disabled the protection for it, can just hover over it and choose the "save movie"

Enjoy! http://www.tonyep.com/Video/HD/Singapore-H...0721_MfYJ6-A-LB

Did a short clip of the meet! Uploading them now, should be done in an hour or so

1 only! Thanks! yeah with a 4 channel balanced too, so I can use both single ended with active ground. Yeah I'm going for balanced, It will be 1x 4 channel and 2x 3 channel, hence the 2 e22 board to serve as the backplane to minimize the wiring.

You're moving ard when i took the multi shots!

Something came! Time to start building them up!

To those who want to download the higher res, here's the link http://www.tonyep.com/Events/Singapore-Headphone-Meet-2009/ There's different sizes, just right click and copy it the one that you want, I've disabled the right-click protection for the gallery

nice last pic!

see food busy eating alrd, no time for pics!

here's the thread http://www.head-fi.org/forums/f45/singapor...-2009-a-448677/

I don't see your thread! edit: found the thread but it was dated last month, I'll make a new one

31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. 54. 55. 56. 57. 58. 59. 60. 61. 62. 63. 64. 65. 66. 67. 68.