Jump to content

voxel

Senior Member
  • Content Count

    71
  • Joined

  • Last visited

Everything posted by voxel

  1. voxel

    Laptop as source

    Hi, S$300 for the Indigo IO.
  2. voxel

    Laptop as source

    hi kank, My friend has bought an echo indigo from the singapore dealer several months before. Here's the address: 865 Mountbatten Road #05-16 Katong Shopping Center S(437844) Tel: 63465347
  3. 4/11, better than bill gates once in a time
  4. Put a mint condition HD580 for sale for my friend. sold. thanks~~
  5. Please count me in. both 1st and 8th are ok~
  6. voxel

    sorry hd580

    The following is my interesting experience on my CardDeluxe->HD580 combo. I got this hd580 from a friend about two weeks ago. I like the sound of 580 (quite similar to 600 indeed, except that the mid-range is warmer, and sound stage a bit smaller). However, the right channel is a bit (but obviously) louder than the left channel. I made several comparisons with a Beyerdynamic DT331 on another computer with onboard sound. For some mysterious reasons, the DT331 has no problem, while the right channel of 580 is still louder... So I went to buy an akg 240M, which has a more charmful mid-range than the 580, to replace this 'problematic' 580. Then I found that the right channel of my new 240M is still louder... There are two possibilities: ( a ) the cables; ( b ) the sound card. I exchanged the two cables for left & right channel, and the right is still louder. So there's something wrong with my lovely CardDeluxe... I checked the output +4/-10dB jumper first. it was set to -10. correct. then the input jumper, also -10. But I found another input jumper which was set to +4. Finally I realized that the two channels have seperate selection jumper. What a mistake I had made Hope this is helpful for those who will invest for good sound cards~~
  7. Hi, The akgs I have owned are K501, K240DF, K1000. They are very low-efficient headphones with great vocal and classical music playback. Also the least fatigue-causing dynamic headphones I know. I had an audition of 271S and 240M in asia sound this afternoon. A cyrus cd (7?) and integreated amp were used to drive both headphones (maybe unfair to 271S due to its low impedance). The 240M has a full-bodied sound with more bass than 240DF (however a bit dull compared to DF). I don't like the K271S much: the sound is too clean and too oppressive perhaps because of the closeback design. hope that some comments could be given by other 271s users
  8. hi sayhitojason, in the original post the resistor is used for (1) protection especially when you're using tube amp; (2) changing damping coefficience to adjust sound. have you posted the question on head-fi? i cannot help more as never done this before:blush:
  9. There have been people doing experiments on driving HD580 & 240DF using a M.F. A500 int amp, but i'm not sure whether the sound is as good as dedicated amps. Perhaps you could borrow some high impedance headphones to test on your YBA to see if the sound is acceptable. The resistor in the image is mainly for protection and sound adjustment, as said by the people. If you could read chinese, here's the original post: link Hope it helps
  10. hi sayhitojason, you can try some headphones from the spk out of your integreted amp before you buy any headamps. (you need to diy a conversion cable from spk out to 1/4 headphone jack) I have listened to k1000 on a YBA DT for a short while before. Although it's reluctantly acceptable, it could be good for other 'normal' high impedance cans: AKG 240DF, 240M, BEYER DT880. For me these 3 cans give very good vocal and classical performance
  11. voxel

    Lynx L22 Sound card

    wowww~~ have seen some LynxTwo & L22 listed on ebay with free shipping worldwide two months ago... The nearest dealer is in Hong Kong: http://www.lynxstudio.com/internationaldistribution.html hope it could help
  12. coz sold. thanks!
  13. Hi, ygpm ok, i'd like to get one card. don't know if there r anyone else for group buy?
  14. I'm afraid the S/N ratio of tube integrated amp could be not high enough for headphones, especially beyers
  15. really appreciate ur infomation I have been using 240DF for nearly two years, and quite satisfied with it for strings & vocals. Actually I'm expecting the similar amount of bass as K501 which is just enough for piano & cello works. (240 is reluctantly enough)
  16. thanks fuwen for the advice. this is my third akg, i think it'll be the last one will go sls next weekend for them~~~. BTW, how's the sound of k1000 from ur ha-2? i'm concerning mainly on the bass. thanks!
  17. thank you lekquan, they take all kinds of hd600/580 cables, some of them are more expensive than k1000 wonder if there are shops selling these converters in SLS...
  18. Hi, just received my k1000 yesterday. Before getting a dedicated amp, i need to use it on my current tube amp for hd600. Does anyone know where i can get a converter from its XLR to normal 1/4'' Jack, or I have to diy? Thanks you! btw, I heard that some power amps do not accept the 4-pin connector comes with the k1000, does it mean that I also need to diy a converter with real speaker connection? Really dun know anything about pwr amps Regards, voxel
  19. I think the 35W is for 8Ohms spks. when driving the 120Ohms k1000, the actual output might be around 1W...
  20. Better let a technician check for u first, since u dun know which other part has been damaged
  21. voxel

    SOLD

    head amp SOLD
  22. voxel

    SOLD

    head amp sold
×
×
  • Create New...