ablaze 0 Report post Posted September 14, 2003 does anyone know how much JMT or the other DIY-ers charge for a standard built-to-spec with 12 buffers etc, PPA? Would US$400 be a fair price? opinions? Share this post Link to post Share on other sites
ablaze 0 Report post Posted September 14, 2003 fancy specs from my other thread: PPA v1.0A board 1% 1/4W hand-matched resistors 4x1000uF 35v Panasonic FC caps 8x100uF 35v Nichicon UPL caps 9xPhilips 1uF metallised polyest box caps 12xHA3-5002 buffers (4 per channel) OPA637B for L/R channels OPA627B for ground biased to Class A with JFET cascodes separate opamp rails Alps Blue pot CMC gold-plated RCA jacks Cliff-UK non-locking Ni-Ag 1/4" headphone jack (hate locking jacks ) FEP teflon-coated solid-core bare copper hookup wires 2% silver solder used Hammond 1455N1602 enclosure yknow the opamps cost >S$100 already? buffers another S$100, and all the various bits and pieces..it all adds up to quite a bit I must say Share this post Link to post Share on other sites
jasonhanjk 0 Report post Posted September 14, 2003 It is easier to build the PPA rather than the Gilmore. Cost for all parts would be around US$150 if you are really good. I say US$250 is a good price without any DC power supply. Share this post Link to post Share on other sites
